Here are the necessary explanations for setting up this purse.
I have tried to provide many pictures to help you complete this project. I am not a sewing specialist (although I like that …) so there is always an intuitive part in my work.
to realize this work you will need
A flexible 8,5 cm clasp that you can get here https://www.prym.com/en/flex-frame-85mm-615176?number=16151760
the embroidered pieces cut to dimensions of 12 x 12 cm
2 pieces of thin fleece to iron of 10 x 10 cm
2 pieces of fabric for the lining of the pouch of 12 x 12 cm
2 pieces of 11 x 6.5 cm fabric in the same fabric as the embroidery for the clasp
2 pieces of thin fleece to iron of 11 x 6.5 cm
2 pieces of fabric for the clasp lining of 11 x 6.5 cm
First of all, this section shows how to prepare the parts that will be used to hold the clasp.
After ironing the fleece on the back of the main fabric (same as the embroidery), pin it with the lining fabric right side up. The fleece is therefore outside the stack.
Turn the 2 pieces over and iron the seams.
Fold in the direction of the width and with the lining inside.
I used the tape to keep these “pipes” tightly closed when they are attached to the main part of the purse.
Here’s how to assemble the main part of the purse with the clasp.